| /

Or 3 months for only ₱1,000 with . Learn More.
• Components:
• 5-¼” woofer with woven fiberglass cone
• 3/4” PEI diaphragm tweeter with fluid cooling
• Contemporary, high-design appearance
• Built-in InvisiBall® mounting hardware*, plus available U-bracket
• Weather resistant enclosure and transducers
• Wide 100° x 100° coverage
• 100 Watt power handling (200 Watt program) in direct 8Ω setting, plus built-in 30 Watt 70V/100V multi-tap transformer
• High fidelity sound character with broad frequency response of 60 Hz – 20 kHz

Technical Specifications
Frequency Range (-10 dB)1 60 Hz – 20 kHz
Frequency Response (+/-3 dB) 85 Hz – 17 kHz
Power Rating2 200 W Continuous Program (2 hrs)
100 W (400W peak) Continuous Pink Noise (2 hrs)
75 W (300W peak) Continuous Pink Noise (100 hrs)
Maximum Input Voltage 25.3 V RMS (2 hrs), 50.6 V peak
Maximum SPL3 110 dB average Continuous Pink Noise (116 dB peak)
Sensitivity4 90 dB, 1W/1m (averaged 100 Hz – 10 kHz)
Coverage Angle5 100° x 100°
Directivity Factor (Q) 6.04 (averaged 1 kHz – 16 kHz)
Directivity Index (DI) 7.6 dB (averaged 1 kHz – 16 kHz)
Nominal Impedance 8 ohms (THRU setting)
Crossover Type 2nd order low-pass, 3rd order high-pass Circuitry
Transformer Taps 70V: 30W, 15W, 7.5W, 3.7W
100V: 30W, 15W, 7.5W
Insertion Loss <0.94 dB at any tap setting
Thru Setting: 8Ω nominal
Recommended Protective
60 Hz high-pass (24 dB/oct) (for 8Ω operation and for
all 70V/100V tap settings)
Low Frequency 135 mm (5.25 in), woven-fiberglass cone with pure
butyl rubber surround with Weather-Edge frame
protection, high-temp fiberglass voice coil former, hightemp voice coil wire, optimized cone geometry, linear
suspension spider, and FEA optimized motor structure.
High Frequency 19 mm (0.75 in) PEI diaphragm, low-viscosity ferromagnetic fluid, and lightweight Kapton™ voice coil former.
Enclosure Material High Impact Polystyrene (HIPS), painted with highly-UV
resistant paint on white (-WH) version for maximum UV
fade resistance.
Grille Highly zinc-plated, finished in durable TGIC polyester
powder coating. MTC-25WMG-1 (&-WH) available
with Weather-Max™ multi-layer foam and tight-weave
mesh vapor barrier backing.
Installation InvisiBall wall-mounting system included. Two 6 mm
attachment points (on top and bottom) for optional
MTC-25UB-1 (&-WH) U-bracket. Secondary

Notify me when this product is available:

Customer Reviews

Be the first to write a review